Solidification behavior, glass forming ability and thermal characteristics of soft magnetic Fe-Co-B-Si-Nb-Cu bulk amorphous alloys

Aykol M., AKDENİZ M. V., Mehrabov Ə.

Intermetallics, vol.19, no.9, pp.1330-1337, 2011 (SCI-Expanded, Scopus) identifier

  • Nəşrin Növü: Article / Article
  • Cild: 19 Say: 9
  • Nəşr tarixi: 2011
  • Doi nömrəsi: 10.1016/j.intermet.2011.05.004
  • jurnalın adı: Intermetallics
  • Jurnalın baxıldığı indekslər: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Səhifə sayı: pp.1330-1337
  • Açar sözlər: B. Glasses, metallic, B. Magnetic properties, B. Thermal stability, C. Rapid solidification processing
  • Açıq Arxiv Kolleksiyası: Məqalə
  • Adres: Yox

Qısa məlumat

The effect of varying Cu content on the bulk glass forming ability (GFA) of (Fe0.36Co0.36B0.192Si0.048Nb 0.04)100-XCuX alloys (X = 0, 0.5, 0.75 and 1.0) is revealed by investigating the thermal behaviors and phase competitions upon solidification. The changes in GFA are interpreted in terms of suppression of consecutive solidification reactions via microstructural and thermal features. Instead of the type of the primary crystallization product originating from the prevalent atomic order in the glass or supercooled liquid, precipitation of faceted binary and higher-order pro-eutectic compounds such as (Fe,Co) 2B and (Fe,Co)NbB from the alloy melt and resulting skewed eutectic coupled zone are correlated with the observed GFA. With the employed centrifugal casting method, the (Fe0.36Co0.36B0.192Si 0.048Nb0.04)99.25Cu0.75 alloy shows the largest critical thickness of 3 mm and the best soft magnetic properties such as 1.58 T saturation magnetization intensity and 11.7 A/m coercivity after annealing. © 2011 Elsevier Ltd. All rights reserved.